Check out out new online store
August 28, 2018
More fuselage progress
January 17, 2018
Time to sand blast the fuselage
Covering a wing
November 17, 2016
1968 PA-18 restoration
November 1, 2016
I'm busy working on my blog posts. Watch this space!
Once the fuselage was dry you can start adding cables, pulleys, any wiring, new fuel lines break and rudder pedals elt mounts floorboards, etc. All this was fabricated new on this build
Once all that is finished you can start covering the belly.
Then when the glue dries, time to shrink
Then once that's dry and shrunk you can start on the sides.
The hardest part is getting the fabric to lay down nicely at the base of the vertical stabilizer
Start gluing and be sure to keep the seam straight up the spine
Once the glue is dry, its time to tighten it up and get rid of the wrinkles, but that's a post for another day. Stay tuned
August 2018 (1)
January 2018 (2)
November 2016 (2)
SUPER CUB RESTORATION