Here we have the supercub wing ready to cover. The leading edges were replaced due to denting over its life. All the old glue gets scrubbed off and tape gets put over all sharp edges, including all the screw heads. The wires were run for nav and strobe lights, smaller wire is used for the landing light. These are modified for one light in each wing instead of two lights in the left wing. We are going to be using Aero LED pulsing lights for better recognition, along with there
We are currently in the middle of a restoration on a 1968 PA-18 supercub. When time allows I will try and add pictures and captions from the previous work completed. We have been very busy this month with annual inspections. First you pull the wings off of a perfectly good flying aiplane and get out your trusty pocket knife. Thats the fun and easy part. Cutting off the old fabric!